Tip 1: It is inconvenient to use a magnet to pick up a small Non-standard Precision shaft. An iron plate can be sucked under the magnet. It can not only absorb many small precision mechanical parts, but also pull the iron plate apart, and the small precision mechanical parts will automatically fall into the collection box, which is very practical.

Skill 2: Non-standard Precision nut processing to remove the jaws of the vise and process two M4 threaded holes, flush two 1.5mm thick steel plates with the jaws, rive the 0.8mm thick hard brass plate with aluminum rivets, and use M4 Countersunk screws are secured to the jaws to create durable soft jaws. This can protect the precision mechanical parts from being pinched.

Tip 3: If there is slippage between the pulley and the axle during the transmission of the pulley, you can use a ￠15~18mm dimpled drill to make a series of dimples on the axle, which can form an adsorption force and prevent slippage.

Skill 4: Tips commonly used in the processing of non-standard precision mechanical parts. Precision turning parts manufacturers generally position first and then clamp, but for some workpieces, clamping will cause workpiece deformation. Therefore, for such a workpiece we first clamp and then position it, find 6 positioning points, and find the degrees of freedom that limit it.

Processing Notes:

1. Before starting the machine, conduct an overall inspection of the machine to ensure the safety and normal operation of the machine.

2. During the operation, the staff need to strictly implement the operating procedures.

3. During the work period, do not chat with personnel or do other unrelated things to avoid accidents.

4. When the processing operation is completed, the processing site should be fully cleaned, the processing residues should be cleaned and recycled, and the main switch of the machine tool should be turned off.